Advertisement
Echoflex Installation Guide
Temperature Sensor
Installation
Use hand tools when installing. Over-torquing with a power tool can
damage the sensor. The sensor's removable back plate can be mounted
on most surfaces.
Note:
replacing the cover. See
Three different mounting options are available:
Flush-mounted to a firm surface with screws and
•
wall anchors (not provided).
Using double-sided tape or Velcro (not
•
provided).
Over a standard, Class 2 low-voltage electrical
•
box. Keyholes in the back plate mate with
standard screw patterns.
1. Insert a flatblade screwdriver into the slot on
the key tab to separate the back plate from
the sensor.
2. Mount the back plate with the plastic key on
the bottom.
3. Align the sensor over the back plate and press
the lower edge until it clicks in place.
4. Test for adequate light levels. See
Test on
Note:
exposure, but for best results, it should be
mounted where it receives four hours of
natural or artificial light daily.
Temperature Sensor
Consider linking the RTS while you have access and before
page 6.
The RTS can operate with low light
Link to a Controller on
Light Level
Page 3 of 8
page 5.
Test
button
Echoflex
Advertisement
