Echoflex Installation Guide
Temperature Sensor
Prepare for Installation
To ensure optimal function, consider the installation environment and the
following guidelines:
For indoor use only. Operating temperature -25°C to 65°C
•
(-13°F to 149°F), 5%–92% relative humidity (non-condensing).
High-density construction materials and large metal appliances or
•
fixtures in the space may disrupt wireless transmissions.
Install the sensor within range of linked receivers or controllers,
•
24 m (80 ft). Consider adding a repeater to extend reception range.
Before linking the sensor, expose it to a good light source for at least
•
five minutes at 200 lux (19 fc).
Install the RTS with the solar cell facing a light fixture. Ideally, an
•
exposure of four hours of natural or artificial light a day.
Supplies required to install (not provided):
Two #6 screws, double-sided tape, or Velcro
•
Temperature Sensor
Page 2 of 8
®
Echoflex