Advertisement
Quick Links
Echoflex Installation Guide
Temperature Sensor RTS
Overview
The Temperature Sensor (RTS) uses wireless
technology to communicate accurate room
temperature from 0°C to 40°C (32°F to 104°F)
and relative humidity from 20% to 92%. The
sensor provides current and on-change values
for target controllers to manage the
environment of a space.
The RTS is available in two radio frequencies,
902 MHz and 868 MHz. The core model
(RTS-1T) monitors temperature. Additional
models are available that also monitor relative
humidity (RTS-1H), provide a temperature set
point (RTS-1TS), and include all RTS features
including fan speed control and an occupancy
signal (RTS-2HS).
The RTS is solar powered and can store energy
to maintain operation during periods of low
light—up to 200 hours in darkness. A CR2032
battery can be used for running tests or backup power assistance, if
required. Color LEDs are visible through the solar panel to indicate the
sensor's operation.
The RTS is well suited for occupancy-based hospitality applications that
require control to power a room or setback temperature control devices.
This document covers installation and tests that apply to all RTS models.
The product package includes the sensor and installation guide.
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Web
echoflexsolutions.com
©2022 Echoflex Solutions, Inc. Trademark and patent
Product information and specifications subject to change.
Echoflex intends this document to be provided in its entirety.
8188M2104 Rev A Released 2022-09
| Email
info@echoflexsolutions.com
| Support
service@echoflexsolutions.com
info: echoflexsolutions.com/ip
RTS-2HS Model
Advertisement
Related Manuals for echoflex RTS
Summary of Contents for echoflex RTS
- Page 1 The RTS is well suited for occupancy-based hospitality applications that require control to power a room or setback temperature control devices. This document covers installation and tests that apply to all RTS models. The product package includes the sensor and installation guide.
-
Page 2: Prepare For Installation
Before linking the sensor, expose it to a good light source for at least • five minutes at 200 lux (19 fc). Install the RTS with the solar cell facing a light fixture. Ideally, an • exposure of four hours of natural or artificial light a day. - Page 3 Use hand tools when installing. Over-torquing with a power tool can damage the sensor. The sensor’s removable back plate can be mounted on most surfaces. Note: Consider linking the RTS while you have access and before replacing the cover. See Link to a Controller on page 5.
-
Page 4: Transmission Rate
For no offset, point the arrow on the dial straight up. Fan Speed C ontrol: (RTS-2HS model only) Adjust the fan speed by selecting a setting: A (auto), O (off), 1 (low ), 2 (med), 3 (high) for the receiving control equipment to interpret. -
Page 5: Battery Power
Temperature Sensor Link to a Controller The compatible target controller must be installed, powered, and within range of the RTS. Note: The linking process can be used both to link a device to a controller and to unlink a linked device from a controller. - Page 6 Echoflex Installation Guide Temperature Sensor Tests and Settings Use the [Test] button and color LEDs to navigate the Tests and Settings menu. The [Test] button is on the side of the sensor and the LEDs display through the right side of the solar panel.
- Page 7 Echoflex Installation Guide Temperature Sensor Compliance For complete regulatory compliance information, see the Temperature Sensor datasheet at echoflexsolutions.com. FCC Compliance Echoflex Temperature Sensor (For any FCC matters): Echoflex Solutions, Inc. 3031 Pleasant View Road Middleton, WI 53562 +1 (608) 831-4116 echoflexsolutions.com...
- Page 8 Echoflex Installation Guide Temperature Sensor Temperature Sensor Page 8 of 8 Echoflex...