Ac Power Adapter; Wall Mounting Plate - Watchguard Firebox T40 Hardware Manual

01.11.22, 13:59

AC Power Adapter

The AC power adapter supplies power for the Firebox. Before you connect the adapter, verify that the
color band on the cord matches the color ring around the power plug on the Firebox.
The Firebox T40 includes a power cable to connect to the AC power adapter.
The suffix on the Firebox SKU indicates the type of power plug included with the device. Note that the
suffix is not restrictive – for instance, though tagged as "AU" for Australia, the Type I plug is also used
in China, New Zealand, and Argentina. If your country does not use one of these four plugs, use an
adapter with one of these plugs.
SKU Suffix
-US
-UK
-EU
-AU

Wall Mounting Plate

The wall mounting plate (available separately) enables you to mount the Firebox on a wall in a good
location to increase the wireless range.
You need four screws 1/8" (3 mm) wide and at least 3/4" (18 mm) long to install the mounting plate.
To install the wall mounting plate:
1. Place the wall mounting plate horizontally against the wall where you want to install the
Firebox.
2. Securely screw the wall mounting plate to the wall with the four screws.
3. Align the two holes on the bottom of the Firebox with the two connection points on the
mounting plate.
4. Push the Firebox toward the mounting plate, until the two connection points on the
mounting plate are inside the holes on the bottom of the Firebox. Then press firmly down to
seat the device on the plate.
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
Plug
Used in regions
Type
A US, Canada, Japan, Taiwan, Central America,
Some countries in South America, Philippines
G United Kingdom, Ireland, Hong Kong, Singapore,
Malaysia, some African countries
C Europe, Middle East, Korea, Indonesia, some
African countries
I China, Australia, New Zealand
Firebox T40/T40-W Hardware Guide
Photo
7/18