How To Set Clock - Hitachi RC-AGU1EA0A Manual

How to Install the Batteries in the Remote Controller
1
Remove the cover as shown in the figure and take out the old batteries.
Install the new batteries.
2
The direction of the batteries should match the marks in the case.
CAUTION
1. Do not use new and old batteries, or different kinds of batteries together.
2. Take out the batteries when you do not use the remote controller for 2 or 3 months.
NOTE
Change the batteries when remote controller LCD display restarts on pressing of any key and there is
no response from air conditioner.

How to set clock

When Timer ON , Timer OFF or both set then it is not possible to change/set clock time. First Timer ON ,
●
Timer OFF or both need to cancel.
If Correct clock time is not set then Timer ON and Timer OFF will not operate correctly.
●
At time of Battery replacement / Reset , Clock time need to set. If it is not set and press any key then default
●
12:00 will be set.
At time of Battery replacement / Reset , Need to follow process from step2 onwards.
●
During Clock time change/set when
●
setting with previous set time.
Press and Hold Timer ON button
1
5 seconds.
or segment start blinking on LCD approx. 5 seconds then
Clock symbol start blinking.
When Clock symbol is in blinking , Press Temperature Up / Down
2
button to change/set desire time value.
Press Timer ON button
3
Clock symbol stop blinking and Clock time will be display on LCD
screen.
symbol is blinking , if no key press then it will come out of Clock
- 3 -
Push and pull to the
dirction of arrow
Batteries
Cover
or Timer OFF button
or Timer OFF button
for
once.