Page 1
Black Clamp-on Speaker Stand - 2 Pack Instruction Manual SKU: MOUNT-SP01CB Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-sp01cb GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
Page 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3
STEP 2 Loosen the knobs on the front of Mounts (A) to adjust the height. Insert the into the holes located on the shaft, and re-tighten the knob to lock the postion. STEP 3 STEP 4 Remove the adhesive backing from Soft Pads Assemble Speaker Plates (B) to Mounts (A) using (C) and stick them to the top surface of Speaker M8x25mm Screws (S-A) with M8 Spacers (S-B)
Page 4
AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-SP01CB and is the answer not in the manual?
Questions and answers