Johnson Controls ACT2 Technical Bulletin page 112

112
Maestro Software
Alarm Setup Information:
(See Figure 50: Refrigeration Circuit Alarm Parameters.)
•
Suction Alarm Setpoints
•
Suction Alarm Time
Delays
•
Suction Alarm Dial-Out
Options
•
Discharge Pressure Alarm
Setpoints
• Discharge Pressure Alarm
Time Delays
Condenser Setup Information:
(See Figure 51: Refrigeration System Condenser Parameters.)
• Condenser Fan Control
(Temperature or Pressure)
•
Discharge Temperature or
Pressure Sensor Location
Defrost Setup Information
(See Figure 52: Refrigeration Circuit Defrost Parameters.)
•
Defrost Duration
•
Defrost Heater Output
Location
•
Defrost Start Times
•
Discharge Pressure Auto-
Restart Options
• Discharge Pressure Dial
Out Options
•
Case Temperature Alarm
Setpoints
•
Case Temperature Alarm
Time Delays
•
Lube Oil Pressure Low
Alarm Setpoint
• Fan 1 Output Location
•
Fan 2 Output Location
•
Fan 1 Setpoints
•
Defrost Termination
Sensor Location and Type
• Liquid Line Solenoid
Output Location
•
Manual Defrost
•
Lube Oil Pressure Low
Alarm Time Delay
• Lube Oil Pressure Auto
Restart Options
•
Lube Oil Pressure Dial-Out
Options
• Fan 2 Setpoints
•
Fan 1 Override
•
Fan 2 Override
•
Runoff Time