Tv Basic Operation - Memorex MVD1402 User Manual

1
Press the POWER button 1 on the remote, or front of the
unit, to turn on the unit; the POWER indicator will light
yellow. Press the TV/AV button 2 repeatedly to select the
TV mode. If the unit is in DVD mode, press the TV/DVD
button 3 first, then press the TV/AV button repeatedly to
select TV mode.
3
2
Adjust the volume level by pressing the VOLUME Up 1 or
Down 2 button.
NOTES:
• When ANTENNA option is set to AIR, only channels
up to 69 can be chosen. When set to CABLE,
channels up to 125 can be chosen.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
The TV/CATV option must be set to CATV when using cable, see step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.

TV BASIC OPERATION

1
2
3
1
2
TV:
CATV:
Change the Antenna option to select between TV or CATV.
Select AIR if using VHF/UHF antenna, and select CATV if
using Cable TV (see page 25, steps 1 and 2).
4
For proper operation, before selecting channels, they must
be set into the unit's Program memory, see page 25.
Press and release the CHANNEL Up 1 or Down 2 button.
The unit automatically stops at the next channel set into
memory.
Direct Program Selection/Number buttons (0-9) 3
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press 1-9 3 as desired.
• For Channels 10 through 99, press -/-- button 4 once,
then enter the 2 digit channel number in order.
• For Channels 100 through 125, press -/-- button 4 twice,
then enter the 2 digit channel number in order.
36
OPTIONS
If using a
VHF/UHF
antenna.
If using Cable
TV.
3
4
1
2