Limited Safety Precautions (Also See Supplement Lv-474) - Curtis CT Series Instruction Manual

CT SERIES
The following safety precautions are recommended
in the use of this compressor:
1. Furnished with a totally enclosed OSHA-
approved belt guard to cover the drive assembly.
Where possible, place the flywheel toward the
wall, and mount the unit a minimum distance of 2
feet from the wall for maintenance convenience.
2. Turn off & lock out the electrical disconnect
switch before working on the unit to prevent the
unit from starting unexpectedly
WARNING: Read and understand supplement LV-474 before installing and operating the compressor.
LIMITED SAFETY PRECAUTIONS
(Also see supplement LV-474)
PAGE 2
3. Release all air pressure from the system before
working on the unit and red tag all electrical
control switches, for safety precaution.
4. Do not by-pass motor over-current protection.
5. Do not change the setting or in any way affect
the operation of the safety valve.
6. Keep unit securely anchored so that movement
will not put a strain on piping, wiring, or air
receiver. (DO NOT USE plastic pipe, rubber
hose, or lead-tin soldered joints in any part of
the compressed air system.)
CAP 410