Wiring Procedures - Pressure Switch (With Magnetic Starter) - Curtis CT Series Instruction Manual

CT SERIES
WIRING PROCEDURES
FOR
FIELD INSTALLATION PRESSURE SWITCH
(WIRED WITH MAGNETIC STARTER.)
TURN OFF POWER BEFORE SERVICING!!!
THE ABOVE PICTURE DEPICTS WIRE CONNECTIONS TO THE PRESSURE
SWITCH.
1. FOR FIELD INSTALLATION CONNECT 18GA WIRES FROM PRESSURE
SWITCH TO STARTER TERMINALS L1 & A2 AS DESCRIBED ON PAGE
19 AND 21.
PAGE 31
CAP 410
PRESSURE SWITCH
CONNECTIONS