Wiring Procedures - 3 Phase Factory Mounted Motor Starter - Curtis CT Series Instruction Manual

CT SERIES
WIRING PROCEDURES
FOR
3 PHASE FACTORY MOUNTED MOTOR STARTER
TURN OFF POWER BEFORE SERVICING!!!
FACTORY MOUNTED MOTOR STARTERS ARE SUPPLIED WITH PRESSURE
SWITCH AND MOTOR CONNECTIONS TO STARTER.
1. CONNECT INCOMING POWER WIRES TO STARTER TERMINALS L1, L2
AND L3.
2. COMPRESSOR FLYWHEEL ROTATION SHOULD BE
COUNTERCLOCKWISE WHEN FACING FLYWHEEL.
3. IF COMPRESSOR FLYWHEEL ROTATION IS REVERSED,
INTERCHANGE SERVICE WIRES TO STARTER TERMINALS L1 AND L2.
PAGE 27
CAP 403
CONNECT INCOMING
POWER WIRES TO
STARTER TERMINALS
L1, L2 & L3.
THERMAL OVERLOADS (3)