Pioneer DVR-660H-S Service Manual page 77

1
[Description of the Main screen] (Continued)
A
Table 4: HDMI audio output status
Indication
OFF
ON
When the unit is connected to DVI device (refer to Table 5), the Audio is not outputted.
Table 5: Type of the connected device
Indication
------
HDMI
DVI
B
When the unit is connected to device with no HDCP support, this display is "HDMI-" or "DVI-".
Table 6: Output color
Indication
YCbCr4:2:2
YCbCr4:4:4
RGB(0-255)
RGB(16-235)
-----------
Table 7: TMDS signal output status
C
Indication
OFF
ON
Table 8: HDCP
Left side : HDCP Authentication Status
Indication
--
OK
Refer to this item only when HDMI or DVI is displayed for the item for the type of the connected device (Table 5).
D
If OK is not displayed although HDMI or DVI is displayed, it means that the HDCP authentication failed.
Right side : Check Revocation list
Indication
--
OK
Refer to this item only when HDMI or DVI is displayed for the item for the type of the connected device (Table 5).
When there is also no valid SRM (include Revocation list), "--" is displayed here.
Table 9: Fs
Indication
E
32k
44k
48k
96k
96k/2
---
F
60
1
2
Description
Output: Off
Output: On
Description
Not connected
It has been confirmed that an HDMI device supporting HDCP is connected.
It has been confirmed that a DVI device supporting HDCP is connected.
Description
Component 12 bits (YCbCr4:2:2)
Component (YCbCr4:4:4)
RGB full range (0-255)
RGB (16-235)
TMDS Off
Description
Output: Off
Output: On
Description
If an device supporting HDCP is connected, HDCP authentication is in progress.
HDCP authentication succeeded.
Description
Checking that the connected device (all downstream devices) is not registered to the
Revocation list, or so.
The connected device (all downstream devices) is not registered to the Revocation list.
Description
32kHz
44.1kHz
48kHz
96kHz
48kHz (original data of 96kHz is down-sampled.)
Audio Off
DVR-660H-K
2
3
3
4
4