Installation; Nk-Ips Components; Overview; Nk Switchboard In Dashboard - Ross NK Series User Manual

Installation

NK-IPS Components

Overview

The NK-IPS (Internet Protocol Server) with the DashBoard control system software allows configuration and
control of the NK-IPS and other NK routing system devices, enhancing the capability of any installed Ross
products by providing access to the entire range of functions.

NK Switchboard in DashBoard

The NK Switchboard, accessible through DashBoard, acts as a virtual panel for any router device. NK Switchboard
enables control of multiple NK Series routers through multiple NK-IPS devices, with alternating between each
NK-IPS as needed.
For More Information on...
• the NK Switchboard, please refer to "NK Switchboard Configuration and Operation" on page 2–7 or the
NK Series plugin Help File in DashBoard.

T-Bus Control System

The NK-IPS is connected to other devices via the T-Bus Control System, a multi-drop RJ-45 control system
supporting collision detection and half-duplex communication. The T-Bus Control System minimizes cable
connections between devices, acting as both a reliable means to provide phantom power to devices and as the
communications line.
Devices on the T-Bus Control System with collision detection support ensure that if two devices transmit messages
at the same time they will not send incorrect data to other devices on the line. T-Bus devices that support collision
detection are able to monitor communication on the line to ensure that no two devices are transmitting at the same
time.
The NK-IPS does not support collision detection.

The Heartbeat

The NK-IPS indicates its status using a pulsating front panel LED called the Heartbeat.
NK-IPS User Guide (v03)
Figure 1.1 NK-IPS — Front View
Figure 1.2 NK-IPS — Rear View
LED
Figure 1.3 Heartbeat Display
Installation • 1–1