Rinse Aid System; Rinse Aid; Setting The Amount Of Rinse Aid - Bosch SPE68B55UC Use And Care Manual

en-us Rinse aid system
Start the Program with the
5.
highest cleaning temperature
without dishware.
To remove any marks from wa-
ter or other residues, we rec-
ommend you operate the appli-
ance without dishware before
using it for the first time.
Tip: You can change these set-
tings and other Basic settings
→ Page 29 at any time.
9 Rinse aid system

Rinse aid system

Rinse aid system
9.1 Rinse aid
For optimum drying results, use

rinse aid.

Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
lift ⁠ .
20
and
2
1
Add rinse aid up to the max
2.
mark.
If rinse aid spills out, remove it
3.
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
Close the lid of the dispenser
4.
for rinse aid.
a The lid clicks into position.
9.2 Setting the amount of
rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
Press
1.
To open the basic settings,
2.
press
a The display shows
Press
3.
til the display shows the value
set at the factory 2.
Press repeatedly until the
4.
right amount of rinse aid has
been set.
– A low setting adds less rinse
aid during the wash cycle
and reduces streaking on
dishware.
– A higher setting adds more
rinse aid during the wash cy-
cle, reduces water spots and
improves the drying result.
To save the settings, press
5.
for 3 seconds.
max
⁠ .
for 3 seconds.
⁠ .
repeatedly un-