Bosch SPE68B55UC Use And Care Manual page 44

en-us Troubleshooting
Issue
Excessive formation
of foam occurs.
Connection to home
network is not es-
tablished.
WLAN display is
flashing.
Home Connect can-
not be implemented
correctly.
Refill indicator for
rinse aid lights up.
Refill indicator for
rinse aid does not
light up.
Display flashes.
44
Cause and troubleshooting
Rinse aid has been spilled.
Remove the rinse aid with a cloth.
▶
Detergent or machine care product used causes
excessive foaming.
Change the brand of detergent.
▶
WLAN on router is not active.
Check the wireless network connection of your
▶
router.
Connection to home network is not available.
Activate the wireless network connection on
▶
your router.
Home Connect set incorrectly.
Please consult the documents supplied for
▶
Home Connect®.
There is a technical error.
Please consult the information on support in
▶
the documents supplied for Home Connect®.
No rinse aid.
Add Rinse aid → Page 20 .
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 20
Rinse aid system is switched off.
Set the amount of rinse aid.
▶
→ "Setting the amount of rinse aid", Page 20
Appliance door is not closed properly.
Close the appliance door.
▶
Arrange the dishware so that no parts
‒
project beyond the rack and prevent the ap-
pliance door from closing properly.