Table of Contents
Advertisement
4.
Secure the lower support bracket to the inner support bracket under the console cover using 1 bolt (5/16 x
7/8 inch) and 1 nut (5/16 inch) as shown in
Note:
You will not use the bottom hole in the main bracket or lower support bracket.
Note:
Ensure that the assembly is vertical. If it hangs at an angle, the lower support bracket may be
installed incorrectly.
1. Carriage bolt (5/16 x 7/8 inch)
2. Lower support bracket
Figure 9
Mounting the kit to the right side of the machine
Figure
Figure 10
Mounting the kit to the left side of the machine
7
10.
3. Inner support bracket
4. Nut (5/16 inch)
g225471
g225517
Advertisement
Table of Contents
