Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Upper mount
Main bracket
Top bracket
Lower support bracket
Welded support bracket
Carriage bolt (5/16 x 7/8 inch)
Nut (5/16 inch)
Knob
Fist clamp
Slotted screw
Locknut
Bolt (5/16 x 1 inch)
Nut (5/16 inch)—use only 4 for 2017 and older
machines
Carriage bolt (5/16 x 7/8 inch)—use only 1 for
2017 and older machines
Inner support bracket—2018 and newer
machines only
Front-weight kit (sold seperately)
Preparing the Machine
1.
Park the machine on a level surface.
2.
Move the motion-control levers to the N
3.
Engage the parking brake.
4.
Shut off the engine and remove the key.
Qty.
–
Prepare the machine.
1
1
1
1
1
4
Install the kit.
3
1
1
1
1
3
6
Mount the kit to the machine.
4
1
1
Install a front-weight kit (if needed).
-L
position.
EUTRAL
OCK
Figure 1
2
Use
g037289
Advertisement
Table of Contents
