Kohler K-368 Installation Manual page 3

Handshower Handle
Screen Washer
Handshower Holder
Fiber Washer
Fiber Washer
Hose Guide
Flexible Hose
Flexible Hose
Washer
Washer
High Pressure Hose
Water Source
1. Install the Handshower
From the top of the bath or finished deck, insert the smaller end
of the flexible hose down through the hose guide.
From the underside of the bath or finished deck, insert one
washer into the flexible hose.
Thread the flexible hose into the high pressure hose.
Insert one washer into the other end of the high pressure hose.
Connect the high pressure hose onto a vacuum breaker (if
installed), or to the appropriate water source.
Run cold and hot water through the hoses to flush out dirt and
debris.
Check for leaks.
Turn the cold and hot water valves off.
Insert the two fiber washers into the end of the flexible hose.
Thread the handshower holder onto the flexible hose.
Insert the screen washer into the end of the handshower holder.
Kohler Co. 3 1041355-2-C