Table of Contents
Advertisement
214
IN CASE OF EMERGENCY
16. Apply the adhesive label from the sealant bottle
where it can be easily seen by the driver as a
reminder that the tire has been treated with a Tire
Inflator Kit, as well as not to exceed the speed
restriction for the treated tire.
WARNING!
Do not adhere the speed restriction sticker to the
padded area on the steering wheel. Adhering the speed
restriction sticker to the padded area on the steering
wheel is dangerous because the air bag may not
operate (deploy) normally resulting in serious injury.
In addition, do not adhere the sticker to areas where
warning lights or the speedometer cannot be viewed.
C
A
R
HECKING
ND
ESTORING
P
RESSURE
The compressor can also be used to check and, if
necessary, restore the tire pressure.
Proceed as follows:
1.
Plug the power cord in the vehicle's power outlet.
2.
Release the quick connector and connect it directly to
the valve of the tire to be inflated.
3.
Push the air release button.
Air Compressor Components
6 — Air Release Button
7 — Quick Connector
T
IRE
8 — Power Cord
9 — Release Button
S
C
EALANT
ARTRIDGE
The sealant liquid is subject to expiration and must be
replaced periodically.
Use only original cartridges, which can be purchased at
an authorized dealer.
Show the cartridge and label to the staff who will have
to handle the tire treated with the kit.
The sealant is effective with external temperatures of
between -40°F (-40°C) and 122°F (50°C).
The sealant has an expiration date.
To replace the sealant cartridge, proceed as follows:
1.
Remove the sealant cartridge by pushing the
release button located on the side of the
compressor.
2.
Insert the new sealant cartridge by pushing
downward firmly.
R
EPLACEMENT
2 — Sealant Cartridge
9 — Release Button
Sealant Cartridge Replacement
Advertisement
Table of Contents
