Cable Connections - Coby TF-TV3717 Instruction Manual

Cable Connections

Figure. Cable connections
Set the unit to the relative input mode
to enable the signal pass.
Amplifier equipped with a Dolby Pro Logic Surround
VIDEO-2 AUDIO-R AUDIO-L VIDEO-OUT AUDIO-R AUDIO-L
HDMI-2 HDMI-1 Y Pb Pr VIDEO-1 AUDIO-R AUDIO-L
Antenna/Power Connection
1. Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net.
You can use 75 Ohm coaxial cable to connect outdoor antenna.
2. Insert one end of the supplied power cord to the player's power jack and the other end to
the 110-240V AC wall outlet.
Compoent Input (Y Cb/Pb Cr/Pr)
The component port is capable of accepting high-definition signals from standard video sources
(e.g., cable/satellite boxes, DVD players, VCRs, etc.)
1. Connect the Y/Pb/Pr port by the component cable (not supplied) to input the video signal.
2. Connect "AUDIO-L" "AUDIO-R" port by the supply AV cable to input the audio signal.
The red and the white plug of the AV cable is for the audio conneciton and the yellow plug for the
video connection.
7
a e nne ti ns
External Moniter
S-VIDEO OPTICAL
Cable Connections
Figure. Cable connections
S-Video Input
The S-Video port is capable of accepting signals from standard video sources
(e.g., cable/satellite boxes, DVD players, VCRs, etc.)
1. Connect the S-Video port by the S-Video cable(not supplied) to input the video signal.
2. Connect the AUDIO-L/R port by the supply AV cable to input the audio signal.
AV Input/Output
The CVBS port is capable of accepting signals from standard video sources(e.g., cable/satellite boxes,
DVD players, VCRs, etc.)
AV Input - 1. Connect the VIDEO-1/2 port by the supplied AV cable to input the video signal.
2. Connect the AUDIO-L/R port by the supplied AV cable to input the audio signal.
AV Output - 1. Connect the VIDEO-OUT port by the supplied AV cable to output the video signal.
2. Connect the AUDIO-L/R port by the supplied AV cable to output the audio signal.
OPTICAL Output - Digital Audio Output Connector
When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream
is sent to the player's digital audio output connector. When the player is connected to a Dolby or
MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home. An
optical audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used.
For your reference
Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing
Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this
technique enables a large quantity of sound data to be efficiently recorded on a disc.
Caution for the optical digital audio output connector:
Do not connect an amplifier(with an optical digital input connector) which does not contain the
Dolby Digital or MPEG audio decoder.
VGA Input
The VGA port of the TV is capable of accepting high-definition signals from computers with a VGA
output jack. When used as a computer moniter, connect the VGA jack and the PC Audio In jack. A
15-Pin D-Sub cable (not supplied) is required for VGA connection and a 3.5mm stereo audio cable (not
supplied) is required for the audio connection.
HDMI 1/2 Input
HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital
audio and video signals simultaneously over a single cable.
A HDMI cable(not supplied) is required for the HDMI connection.
These HDMI input connectors are capable of receiving video at resolutions up to 1080p
(1080-progressive).
8