Table of Contents
Advertisement
Figure. Cable connections
Antenna/Power Connection
1.
Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You
can use 75 Ohm coaxial cable to connect outdoor antenna.
2.
Insert one end of the supplied power cord to the player's power jack and the other end to the 110-240V
AC wall outlet.
Wall Outlet 100~240V
VGA Input - PC Connection
The VGA port of the TV is capable of accepting high-definition signals from computers with a VGA output
jack. When used as a computer moniter, turn off both units and then connect the VGA jack and the PC Audio
In jack with a 15-Pin D-Sub cable and a 3.5mm stereo audio cable. The mentioned cables are not included
with this product.
Cable Connections
IMPORTANT NOTICE
1.
Be sure to have all necessary connections properly done
before connect the power supply.
2.
If you have difficulty inserting the plug, turn it over and
re-insert it.
3.
If the product will not be used for a long period of time,
disconnect the power.
6
Hide quick links:
Advertisement
Table of Contents
