Midea GAIA Series User Manual page 81

Sleep Operation
•
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are
ready to go to sleep. When in COOL mode,
the unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
The sleep feature will stop after 8 hours
and the system will keep running with
final situation.
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the first two hours
Set
temperature
1hr
Heat mode( -1 C/2 F) per hour
for the first two hours
Saving energy during sleep
Keep
running
1hr
Breezeless Operation
•
Press the Breezeless button on the remote
control to activate the breeze cool operation.
The air conditioner will adjust the louver angle
and fan speed automatically on the basis of
room temperature and humidity variable.
There are four different operation state,
See Fig. B1, Fig. B2, Fig. B3, Fig. B4 .
Breeze billowing
away
Fig. B1
Breezeless
Fig. B3
NOTE: For the rooms with large heat load or
the outdoor temperature is too high, you'd
better not choose breezeless operation, this
may result in uncomfortable feeling.
Mild breeze
Fig. B2
Breezeless
Fig. B4
 
Page 10