Hardware Monitor Setup; Auto-Detect Hard Disks - BOSER Technology HS-4650 Manual

4.10 Hardware Monitor Setup

AMIBIOS SETUP – HARDWARE MONITOR SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
*** System Hardware Monitor ***
Chassis Intrusion
TSENS1 Temperature
TSENS2 Temperature
TSENS3 Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 2.500V
+ 3.300V
+ 5.000V
+12.000V

4.11 Auto-Detect Hard Disks

This option detects the parameters of an IDE hard disk drive, and
automatically enters them into the Standard CMOS Setup screen.
Up to four IDE drives can be detected, with parameters for each
appearing in sequence inside a box. To accept the displayed entries,
press the "Y" key; to skip to the next drive, press the "N" key. If you
accept the values, the parameters will appear listed beside the drive
letter on the screen.
36
Available Options:
Disabled Disabled
Enabled
Reset
ESC: Exit
PgUp/PgDn: Modify
F2/F3: Color
: Sel