Peripheral Setup - BOSER Technology HS-4650 Manual

4.9

Peripheral Setup

The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the BIOS
issue a series of commands to affect the transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and then
let the controller and the CPU perform the complete task by them. This
is much simpler and more efficient (also faster).
AMIBIOS SETUP – PERIPHERAL SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port3
Serial Port3 IRQ
OnBoard Serial Port4
Serial Port4 Mode
Serial Port4 IRQ
OnBoard FDC
OnBoard Serial Port1
OnBoard Serial Port2
Serial Port2 Mode
IR Pins
Duplex Mode
Receiver Polarity
Transmitter Pdarity
OnBoard Prarllel Port
Parallel Port Mode
EPP Version
Parallel Port DMA Channel
Parallel Port IRQ
OnBoard IDE
OnBoard AC'97 Audio
MPU-401
MPU-401 I/O Address
3E8/COM3 Available Options:
11 Disabled
2E8/COM4 Primary
Normal Secondary
10 Both
Enabled
3F8/COM1
2F8/COM2
Normal
N/A
N/A
N/A
N/A
378
Normal
N/A
3
7
Both
Enabled
ESC: Exit
Disabled PgUp/PgDn: Modify
330h-333h F2/F3: Color
: Sel
35