Table of Contents
Advertisement
! Warning, caution and attention
DEFINITION
Warning Represents dangerous situations or actions that may cause personal injury or death.
Caution Represents situations or actions that may cause damage to the thermal imager or
permanent data loss.
Attention Represents prompt information useful to users.
Important information
please read before using the instrument
Warning – This instrument has a built-in laser transmitter. Do not stare into the laser beam.
The laser specification is 635 nm, 0.9mW, Class II.
Caution– Because the thermal imager uses a very sensitive thermal sensor, it is not allowed to
directly aim the lens at a strong radiation source (such as the sun, direct or reflected laser beam,
etc.) under any circumstances (turn on or off), otherwise the thermal imager will be affected.
Cause permanent damage!
Caution- The original packaging box must be used during transportation. Do not shake or
bump the thermal imager strongly during use and transportation.
Caution–It is recommended to use the original packaging box when storing the thermal
imager, and place it in a cool, dry, ventilated environment without strong electromagnetic
fields.
Caution -Avoid oil stains and various chemical substances from staining and damaging the
lens surface. After use, please close the lens cap.
CautionIn order to prevent the potential danger of data loss, please copy (backup) the data to
the computer frequently.
Advertisement
Table of Contents
