Table of Contents
Advertisement
10.3.3
Minimum brightness
1
max
2
max
Fig. 20:
Setting the minimum brightness
Depending on the set operating mode, the minimum brightness is set in the right [1] or left [2]
setting range of the trimmer.
–
To set the operating mode: see chapter 10.3.2 "Operating modes" on page 47.
The setting of the minimum brightness is signalled directly by the connected lighting.
Use the following steps to set the minimum brightness:
1. Turn the trimmer slightly.
–
The device switches the lighting to the current minimum brightness.
2
Now set the new suitable minimum brightness for the lighting system on the trimmer.
–
Approximately 3 seconds after the trimmer is no longer moved, and the device switches
to the previously set brightness.
The new minimum brightness has been stored.
Product manual 2CKA001473B5283
Operation
│48
Advertisement
Table of Contents
