5.4
Device overview
In the following you will find an overview of actuators, sensors and control elements for the
implementation of lighting control with movement detectors.
The brief descriptions of the characteristics provide an initial orientation. For a detailed overview
of the characteristics and applications of the devices, see the following items:
Characteristics (device functions): see chapter 6 "Device Functions" on page 15
■
Applications: see chapter 12.2 "Case studies" on page 56
■
The following actuator variants are available for combining movement detector attachments with
actuators.
Product manual 2CKA001473B5283
E-contact
64814 U-500
e-contact insert flex, 1-
gang
64811 U-500
Relay insert flex, 1
gang
64821 U-500
Relay insert flex, 2
gang
64891 U-500
Sub-insert flex
Dimmer
64851 U-500
LED dimmer insert flex,
1gang
Overview of product range
Residential applications and old installations in
locations where an N-busbar is not available.
– Noiseless switching of lighting systems.
– 2-wire connection (neutral busbar is not
required, but can be connected as an option)
For all popular applications
– Switching of lighting systems.
For all popular applications
– Expansion of the coverage and the detection
range.
– Setup of extension operation.
For all popular applications
– The device is used for switching and/or
dimming lighting systems.
– Optional use of an N-busbar.
│12