Overview; General Description; Safety Regulations - ABB Eden OSSD Product Manual

Coded non-contact safety sensor
Hide thumbs Also See for Eden OSSD:
Table of Contents

Advertisement

2 Overview

General description

Eden OSSD sensor consists of two separate devices – Adam and Eva – intended to use as
interlocking device for gates, hatches etc. Eva can be general coded or unique coded.
Eden OSSD meets the coding requirements according to EN ISO 14119:2013 regarding manipulation
protection.
Eden
Adam
Eva
DYN
OSSD
General
Unique
Reset
Info Reset
Status
Info
M12-5
M12-8
M12-5
M12-8
Eden digital, relationship

Safety regulations

Warning!
Carefully read through this entire manual before using the device.
The devices shall be installed by a trained electrician following applicable safety regulations,
standards and the Machine directive.
Failure to comply with instructions, operation that is not in accordance with the use prescribed in
these instructions, improper installation or handling of the device can affect the safety of people
and the plant.
For installation and prescribed use of the product, the special notes in the instructions must be
carefully observed and the technical standards relevant to the application must be considered.
In case of failure to comply with the instructions or standards, especially when tampering with
and/or modifying the product, any liability is excluded.
2TLC172272M0201
Rev E
6

Advertisement

Table of Contents
loading

Table of Contents