Download Print this page

Price Pfister 15 Series Quick Start Manual page 3

In-wall diverter valve

Advertisement

Available languages

Available languages

5
5B
5A
5E
HOT
SUPPLY
VALVE
5C
5H
5 VALVE INSTALLATION
Valve Body inlets (5A) and outlets (5B) are designed to accomodate 1 / 2 -14 NPT pipe.
Connect pipe from Supply Valve Tub Outlet (5C) to Diverter Valve Body Inlet (5A). Plug
Supply Valve Shower Outlet (5D) with Pipe Plug (5E) (For Tub & Shower connections,
do not plug Supply Valve Outlets ).
WARNING: When attaching threaded fittings, use thread sealant or PTFE
Plumber's tape according to manufacturer's instructions.
CAUTION: When using iron pipes, it is not recomended to reduce outlet pipe
diameter.
COPPER PIPE
CAUTION: For Copper Sweat joints, it is important to remove Valve Cartridge
(5F) and other Plastic Components from the Valve Body before soldering. Use copper
pipe adapters (not furnished) in this type of installation.
WARNING: When reassembling unit, be sure that Tabs (5G) from Valve Cartridge
(5F) are set properly on the Valve Body Groves (5H).
ENGLISH
5D
COLD
5F
5G
5F
6
6B
SECONDARY
OUTLET
6 OUTLET INSTALLATION
Connect Primary (6A) and Secondary (6B) Outlet pipes to Diverter Valve Body Outlets
(6C).
7 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
8
8F
8E
8C
PRIMARY
OUTLET
FLOW
8 FLUSHING
Turn on Hot and Cold water supply lines. Use Trim Handle (8B) to rotate Stem (8C).
Rotate Stem (8C) clockwise allowing water to flow to Primary Outlet (8D). Rotate Stem
(8C) counterclockwise allowing water to flow to Secondary Outlet (8E) until all foreign
matter has cleared the line. By having the Handle (8B) in the center position, water
will flow from both Primary and Secondary outlets. Repeat this step in the warm and
full hot positions.
Proceed to finish wall.
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased
your faucet.
2.
When replacement parts are not available, please write or call Price
Pfister Consumer Service.
3.
Always turn off water and relieve pressure before working on your
faucet.
3
PRIMARY
OUTLET
6A
6C
8D
8C
SECONDARY
OUTLET
8B
SECONDARY
OUTLET
FLOW
PRIMARY &
SECONDARY
OUTLETS FLOW
PRIMARY
OUTLET

Advertisement

loading

This manual is also suitable for:

015-3wdx