Advertisement
Installation Steps
Roll up the Soft Top Deck to make installation to the Flip
Top Plates more manageable.
23
Lift the soft top and header channel assembly onto the
windshield gasket.
25
Unfold the soft top main deck fabric over the top of the
roll cage and in place. Close the top toward the
windshield.
27
NOTE: Actual product may vary from illustration.
Page 7 of 9
TIP: It may be helpful to have a second person for this
step. Place the top face down and re-fold, beginning
with the rear portion.
24
Place pivot tubes over the mount hinge plate. Line up
the brackets then secure with the counter-sink Allen
head screw and nylon lock-nut.
TIP: Lift up the main fabric for easier access to the
brackets.
26
Check the front edge to windshield edge lines up to
windshield seal.
28
Advertisement
