Advertisement
Installation Steps
Tighten all door surround knobs into door surround
assembly at this time. Repeat steps 13 through 16 on
passenger side.
Medium
17
Place provided latch as shown and reattach with the
screws from the previous step. Do not tighten the
screws and adjustment may be needed. Repeat steps
19-20 for the other side.
19
Tuck the plastic strip behind latches and along side rails.
See photo below for proper fit.
21
NOTE: Actual product may vary from illustration.
Small
Large
Page 6 of 9
Using a Torx T40 bit to remove the latch bracket screws
from the windshield on the bottom of the driver's and
passenger's side. Save screws for re-use.
18
Fold back the hardware tubes of the header channel
assembly then install the main deck fabric. Secure with
snaps as shown.
20
Secure the Flip Top Header Assembly to the Soft Top
Deck by engaging the Hook and loop flap around the
tube.
22
Advertisement
