Advertisement
Installation Steps
Install LH Upright Lower Plastic onto LH Upright and
secure with 1 self-tap screw.
11
Position completed door surround onto the vehicle and fit
the bracket over the roll bar.
13
Secure the mounting plate to the roll cage using turn-
knobs in the holes. Do not fully tighten knob yet.
15
NOTE: Actual product may vary from illustration.
Page 5 of 9
Repeat this section (steps 1-11) to assemble passenger's
side door surround.
12
Fit LH Door Surround Mounting Plate on top of door
surrounds.
14
Fit top retention strap to driver side - between the
hinge plate rear hole and the door surround bracket,
and screw down with small knob.
16
Advertisement
