bulkhead mounting
1. Remove the fixing plate, mounting base, bottom plate and cover.
2. Fasten the mounting base and bottom plate at the top of the display unit.
3. Fasten the cover at the bottom of the display unit.
4. Fasten the fixing plate to the bulkhead with M10 bolts, nuts and washers (local
supply).
5. Fix the display unit to the fixing plate with two hex bolts M8 x 40.
Handles (option)
1. Remove cosmetic caps at front of display unit.
2. Fasten the handles with rosette washers, spring washers and panhead screws.
1-6
Figure 1-7 Bulkhead mounting of display unit
Handle
(Type OP03-70, Code No. 008-423-420
Figure 1-8 Attachment of handles
Mounting base