Table of Contents
Advertisement
Figure 30 Failover Assignments
5.
On the screen as shown in
drives. ([Enabled] following a drive means that the drive has been selected.) Then, select
ADD, and press Enter to configure the dedicated hot spare drives.
Figure 31 Selecting drives
Deleting RAID arrays
1.
On the storage controller configuration screen as shown in
Configuration, and press Enter.
Figure
31, select the drives to be configured as dedicated hot spare
20
Figure
32, select Logical Device
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UniServer E3200 G3 and is the answer not in the manual?