CipherLab RS35 Reference Manual page 38

RS35 Mobile Computer
5) Connect the USB plug to the approved adapter for external power connection, or plug
it to the USB port of PC/laptop for data transmission/ charging.
While the device battery is being charged, the LED on mobile computer will indicate
charging status.
LED Indicator
Charging
Note:
(1) The USB Type-C cable must be removed before installing the snap-on cable.
(2) For data communication, you could also use a USB Type-C cable to connect the mobile computer
to your PC or laptop.
Status
Red, solid Charging the mobile computer
Red, blink Charging error
Green, solid Charging complete
No light The cable is not correctly connected
Description
36