Table of Contents
Advertisement
When the cleaning is completed, install the glass
panels and the oven door. To install the oven door,
do the above steps in the opposite sequence.
4
6
Make sure the slot in the hinge A rests
on the edge of the hinge support B
before releasing the oven door.
A
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
18
4
5
6
6
B
Make sure the levers are in their
original position before closing the
door.
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
Advertisement
Table of Contents
