Table of Contents
Advertisement
Playback
Playback
USB DRIVE & SD/MS/MMC CARD PLAYBACK
Insert a USB drive in the USB slot. Press [USB], then use the direction key [ ]/[ ] to select MEDIA, then USB.
Press [ENTER] to access the connected USB drive.
Insert a SD, MMC or MS card in the SD/MMC/MS card slot. Press [USB], then use the direction key [ ]/[ ] to
select MEDIA, then CARD. Press [ENTER] to enter the connected memory card.
Select DVD and press [ENTER] to return to the DVD mode.
NOTE:
If the player should freeze when you load a USB drive or a memory card, turn off the player and disconnect the
power cord from the AC outlet. Remove the USB drive and/or memory card from the player and then power on the
player again. The player will resume normal status.
The connected USB drive or the memory card is probably not a certified one. The player cannot play any
uncertified USB drive and memory card.
For menu playback operation, please refer to the MP3 DISC PLAYBACK part in this chapter.
i Pod PLAYBACK
MULTIMEDIA PLAYER PLAYBACK
MULTIMEDIA PLAYER PLAYBACK
i Pod PLAYBACK
This system is designed with the same connector found in all
multimedia player
to the docking station on the top panel you can play the
of this system.
Multimedia Player Adapters
To accommodate all models of dockable multimedia players we have included several different multimedia player
adapters to ensure that the multimedia player will fit properly in the docking station. Select a proper adapter for
your particular model of dockable multimedia player, then plug it to the docking area of the docking station.
Adapter Replacement
To change iPod dock adapters, you will need a small flat-head screwdriver. Insert the tip of the screwdriver into the
rectangular slot of the adapter; then gently pry up to loosen and remove it. To install another adapter that fits your
iPod, press it down into the docking station until it locks into place.
Switch off the unit. Insert your multimedia player with its dock connector faced downward to the dock connector of
the docking station. Then switch on the unit again.
Press [SOURCE SELECT] repeatedly to switch to the option LINE 2 to play the connected multimedia player.
NOTE: Do make sure that this unit is switched off before you plug in or
docking station
. Otherwise, the multimedia player
multimedia player
multimedia player
remove
may be damaged.
-22-
docks. By simply connecting the
through the speakers
the multimedia player from the
Advertisement
Table of Contents
