Table of Contents
Advertisement
System Setup
1.3 OSD LANGUAGE (On-Screen Display Language)
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions
is playing
, the closed captions will be shown on the
screen. Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped etc, for several
minutes, a screen saver will appear on the screen. You can press any key or button except [STANDBY] to wake it
up.
The unit will go into the standby mode
after 20 minutes in
the screen saver mode. You can press [STANDBY] to
switch it on.
OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: During a playback or in the paused status each time you open the disc tray, the unit will memorize the last
,
playback time. Next time when you insert the same disc and close the disc tray to load the disc, the unit will play
from the memorized point.
OFF: Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker
respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
-11-
Advertisement
Table of Contents
