Table of Contents
Advertisement
Troubleshooting
Trouble
Images on the LCD
monitor appear dark or
whitish.
Coloured bright spots
appear on the LCD
monitor.
Aspect ratio of the
image is strange when
watching images on TV.
Recording cannot be
performed.
Vertical lines appear on
recorded images.
The LCD monitor
becomes red or black
for an instant.
During recording, the
date/time does not
appear.
The LCD monitor
indications blink.
Digital zoom does not
work.
The focus is not
adjusted automatically.
The colour of the image
looks strange.
(Continued)
•
Adjust the brightness and angle of the LCD monitor.
•
When the LED light reaches the end of its service life,
images on the LCD monitor become dark. Consult your
nearest JVC dealer.
•
The LCD monitor is made with high precision technology.
However, black spots or bright spots of light (red, green or
blue) may appear constantly on the LCD monitor. These
spots are not recorded on the picture. This is not due to
any defect of the unit. (Effective dots: more than 99.99%)
•
Change the settings in [SELECT TV TYPE] to match
the aspect ratio of the image with the screen size of the
connected TV.
•
SD card is full. Delete unnecessary files or replace the SD
card.
•
Such a phenomenon occurs when shooting a subject
illuminated by bright light. This is not a malfunction.
•
Such a phenomenon occurs when shooting under direct
sunlight. This is not a malfunction.
•
Touch the DISP button once.
•
Certain modes of program AE, effect, DIS and other
functions that cannot be used together are selected at the
same time.
•
Change the settings in [ZOOM].
•
Digital zoom is not available in the still image recording
mode.
•
Set [FOCUS] to [AUTO].
•
Clean the lens and check the focus again.
•
Wait to become natural colour. The camcorder adjusts the
white balance automatically but it takes a time.
•
Try manual white balance adjustment.
•
In bright places, setting [PROGRAM AE] to [NIGHT] or a
slow speed is not recommended.
•
When the recorded image is too dark, try backlight
compensation or adjust brightness.
•
When the recorded image is too bright, try adjust
brightness.
Action
Z
63
–
–
63
33
–
–
15
–
62
–
26
69
–
27
–
25, 26
26
Advertisement
Table of Contents
