Table of Contents
Advertisement
Troubleshooting
Fault
When operating from
the DC socket:
The ignition is on
and the device is not
working and the LED
is not lit.
The display shows an
error message (e.g.
"Err1") and the device
does not cool.
The interior light of a
compartment flashes.
28
Possible cause
The DC outlet is dirty.
This results in a poor
electrical contact.
The fuse of the DC plug
has blown.
The DC fuse inside the
device has blown.
The vehicle fuse has
blown.
The device has
switched off due to an
internal fault.
The lid of the
compartment has been
left open for more than
three minutes.
CFX75DZW, CFX95DZW
Suggested remedy
If the plug of your cooler becomes very
warm in the DC outlet, either the DC
outlet must be cleaned or the plug has
not been assembled correctly.
Replace the fuse in the DC plug, see
chapter "Replacing the DC plug fuse"
on page 25.
This can only be repaired by an
authorised repair centre.
Replace the vehicle's DC socket fuse.
Please refer to your vehicle's operating
manual.
This can only be repaired by an
authorised repair centre.
Close the lid of the compartment.
EN
Advertisement
Table of Contents
