Table of Contents
Advertisement
You can activate this option:
•
After you press
programme knob are locked.
•
Before you press
start.
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
•
To activate/deactivate this option press
and
at the same time until the indicator
comes on/goes off.
BEFORE FIRST USE
During installation or before first use
you may observe some water in the
appliance. This is residual water left in
the appliance after a full functional test
in the factory to ensure the appliance
is delivered to customers in perfect
working order and is no cause for
concern.
1. Connect the mains plug to the mains socket.
2. Open the water tap.
DAILY USE
WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
1. Open the appliance door.
2. Empty the pockets and unfold the items before
you put them in the appliance.
3. Put the laundry in the drum, one item at a time.
Do not put too much laundry in the drum.
4. Close the door firmly.
36
: the options and the
: the appliance cannot
ACOUSTIC SIGNALS
The acoustic signals operate when:
•
The programme is completed.
•
The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press
and
at the same time for 6
seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in the
compartment for washing phase.
5. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
CAUTION! Make sure that no laundry
gets caught between the seal and the
door to avoid risk of water leakage and
damage to the laundry.
Washing heavily oiled, greasy stains
could cause damage to rubber parts
of the washing machine.
Advertisement
Table of Contents
