Supermicro SuperServer 1029P-WT User Manual page 94

SuperServer 1029P-WT User's Manual
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 172.31.0.1).
VLAN
This item displays the virtual LAN settings.
Configure IPV6 Support
This section displays configuration features for IPV6 support.
LAN Channel 1
IPV6 Support
Use this feature to enable IPV6 support. The options are Enabled and Disabled.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are Unspecified, Static, and DHCP.
*If the item "Configuration Address Source" above is set to Static, the following items
will become available for configuration:
•
Station IPV6 Address
•
Prefix Length
•
IPV6 Router1 IP Address
•
IPV6 address status
•
IPV6 DHCP Algorithm
94