Advertisement
Available languages
Available languages
Do not remove the lid during the heating cycle. Scalding may occur. Do not operate the kettle without water. If the unit overheats, please allow the unit to cool for at least 15 minutes.
•
Do not fill above the MAX line; this may cause water to overflow, which may cause scalding.
•
•
Steam may damage walls or cabinets, during use turn the spout away from walls toward an open space; use heat resistive pads under the kettle to prevent damage to wood finishes.
•
Do not place or use the unit on or near a hot gas or electric burner or in a heated oven.
Never operate the appliance when the lid is open or removed.
•
To remove from the power source, turn the unit OFF and pull the plug from outlet. Never pull by the cord.
•
To reduce the risk of fire or electrical shock, do not remove the bottom cover.
•
Do not use for kettle for other than intended use.
•
To prevent discoloration, do not place tea bags, coffee, instant noodle, or any other liquids or items inside the kettle.
•
Do not wash under direct running water as this will damage the control panel. Clean with a soft moist cloth.
•
•
Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).
The kettle may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.
•
Do not disassemble or attempt to repair on your own.
•
PLEASE SAVE THiS INSTRUCTION!
BEFORE INITIAL USE
Remove all packaging materials.
•
Fill kettle to the MAX line and bring to a boil. When the unit completes the boiling cycle, discard the water - repeat the process 2 to 3 times. This will remove any dust or residue remaining from the manufacturing process.
•
CLEANING AND MAINTENANCE
CLEANING
•
Unplug unit before cleaning and allow unit to cool down.
•
Wipe the exterior of kettle with a soft cloth. Do not use abrasive scouring pads or cleaning powders as they may scratch the surface.
•
Due to scale build up, it is best to de-scale your kettle weekly. It is recommended to use Citric Acid for de-scaling. If Citric Acid is not available, you can use the juice of 1 lemon. Fill kettle halfway with Citric Acid/lemon and
water mixture. Allow the unit to boil the solution two to three times. Rinse clean and wipe with a soft cloth.
SPECIFICATION
Power supply
230V ~ 50 Hz
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th
and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
UKR ПОСІБНИК З ЕКСПЛУАТАЦІЇ
ЗАХОДИ БЕЗПЕКИ
Уважно прочитайте дану інструкцію перед експлуатацією приладу і збережіть її для довідок надалі.
6
Advertisement
