Startup Menu - Lenovo 20EQS1LG00 User Manual

Table 3. Security menu items (continued)
Menu item Submenu item

Startup menu

To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu.
Attention:
• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a
format operation. Otherwise your data might be erased or overwritten.
• If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive
encryption locks the computer from starting once detects the change of startup sequence.
To change the startup sequence temporarily so that the computer starts from a desired drive, do the following:
1. Turn off the computer.
2. Turn on the computer. When the logo screen is displayed, press F12.
3. Select the device that you want the computer to start from.
Note: The Boot menu will be displayed if the computer cannot start from any devices or the operating
system cannot be found.
The following table lists the Startup menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Table 4. Startup menu items
Menu item
Boot
Network Boot
Value
Value
Comments
selectable, and the computer only starts from
the internal storage drive. To complete the
configuration of Device Guard, you have to set a
supervisor password.
When this option is disabled, the setup options
are configurable and you can choose any boot
options to start the computer.
Comments
Select the boot device when you
press the power button to turn on the
computer.
Select the boot device when the system
wakes from LAN. If Wake On LAN is
enabled, the network administrator can
turn on all of the computers in a LAN
remotely by use of network management
software.
.
Chapter 6 Advanced configuration
79