Table of Contents
Advertisement
Scanning your finger
To scan your finger, tap the fingerprint reader with the top joint of your finger and hold your finger there for
one or two seconds with a little pressure. Then lift the finger to complete one scan.
Behavior of the fingerprint reader indicator
Indicator behavior
1
Off
2
Solid green
3
Amber, blinking
Associating your fingerprints with your power-on password and hard disk password
To associate your fingerprints with your power-on password and hard disk password, do the following:
1. Turn off and then turn on the computer.
2. When prompted, scan your finger on the fingerprint reader.
3. Enter your power-on password, hard disk password, or both as required. The connection is created.
When you start the computer again, you can use your fingerprints to log in to the computer with no need to
enter your Windows password, power-on password, and hard disk password.
60
ThinkPad P50 User Guide
Description
The fingerprint reader is not ready for tapping.
The fingerprint reader is ready for tapping.
The fingerprint cannot be authenticated.
Advertisement
Table of Contents
