Advertisement
35-7/8"
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
3-Wall Alcove
Drain location:
Right
Basin area, bottom:
46" x 24" (1168 mm x 610 mm)
Basin area, top:
54" x 27" (1372 mm x 686 mm)
Weight:
100 lbs (45.4 kg)
Minimum floor load:
43.5 lbs/ft² (212.4 kg/m²)
Water depth:
14" (356 mm)
Water capacity:
63 gal (238.5 L)
Cutout:
Drop-in, 58" x 34" (1473 mm x 864 mm)
Electrical component
Blower: 120 V, 10 A, 60 Hz, 300 W
rating:
Blower speed:
Variable
Minimum flat for door:
2" (50 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:21
5' BubbleMassage Bath
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
Mariposa
K-1239-GRF
Advertisement
