Table of Contents
Advertisement
446
7-2. Steps to take in an emergency
4
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
5
Open and close any of the doors of
your vehicle with the power switch
off.
6
Maintain the engine speed of the
second vehicle and start the hybrid
system of your vehicle by turning
the power switch to ON mode.
7
Make sure the "READY" indicator
comes on. If the indicator does not
come on, contact your Lexus
dealer.
8
Once the hybrid system has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
Method connecting jumper (or
booster) cables to the exclusive
jump starting terminal
1
Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and doors locked.
4
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
LS500h_OM_(U)_1810
(P.74)
2
Open the hood. Remove the driver
side engine compartment cover
and fuse box cover. (P.382,
385)
Push the tabs in and lift the lid off.
3
Open the exclusive jump starting
terminal cover.
on your vehicle and connect the
A
on the second vehicle. Then,
B
Advertisement
Table of Contents
