Brother 885-E33 Operation Manual page 19

6
Pass the thread as illustrated below.
1 Thread guide
2 Thread guide cover
7
Feed the upper thread as illustrated below.
8
Make sure to guide the thread through the
thread take-up lever from right to left.
1 Thread take-up lever
KNOWING YOUR SEWING MACHINE
Memo
• If the needle is not raised, the thread take-
up lever cannot be threaded. Be sure to
press the needle position button to raise the
needle before threading the thread take-up
lever.
9
Put the thread behind the needle bar thread
guide.
1 Needle bar thread guide
10
Turn off the sewing machine.
CAUTION
• Make sure you turn the power off while
threading the machine without using the
needle threader (for models equipped with the
needle threader). If you accidentally step on
the foot controller and the machine starts to
sew, you could be injured.
1 1
Thread the needle from front to back and pull
out about 5 cm (2 inches) of thread.
Note
• If the thread take-up lever is lowered, the upper
thread cannot be wrapped around the thread
take-up lever. Make sure you raise the presser foot
lever and the thread take-up lever before you feed
the upper thread.
• If you incorrectly feed the thread you may cause
sewing problems.
1
1 5 cm (2 inches)
17
1