Attach Zigzag Foot "J - Brother 885-E33 Operation Manual

Table of Contents

Advertisement

CAUTION
• Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or
stop button) is accidentally pressed and the
machine starts sewing.
1

Attach zigzag foot "J".

2
Place the two pieces of fabric with their right
sides facing each other.
3
Sew basic stitches to the end of the zipper
opening, and then sew reverse stitches at the
end of the stitching.
• Use basting stitching to sew the zipper
opening (where the zipper will be inserted).
• Refer to "Basic stitching" on page 31.
4
Open the seam allowance, press it from the
wrong side of the fabric with an iron, align
the center of the zipper with the stitching,
and then baste the zipper in place.
1 Wrong side of fabric
2 Basting stitching
3 Zipper
5
Attach the presser foot holder to the right
side of the pin on zipper foot "I".
I
6
Select stitch .
(start/
1 Basting stitching
2 Reverse stitches
3 Wrong side of
fabric
4 End of zipper
opening
1 Pin on the right side
2 Needle drop point
CAUTION
• Turn the handwheel by hand to make sure the
needle does not hit the presser foot before you
start sewing. If you choose a different stitch,
the needle will hit the presser foot and break
the needle. You may also be injured.
7
With the right side of the fabric facing up,
continue sewing with the zipper on the right
side of the presser foot.
• Sew the stitching in order, from 1 to 3 .
CAUTION
• Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper, the
needle may break and you may be injured.
Memo
• If the presser foot contacts the zipper slider,
leave the needle lowered (in the fabric)
and raise the presser foot. After moving the
slider so it will not contact the presser foot,
lower the presser foot and continue sewing.
• To sew with the zipper on the left side of
the presser foot, attach the presser foot
holder to the left side of the pin on zipper
5
foot "I" in step
I
8
When you have finished sewing, remove the
basting stitching.
UTILITY STITCHES
1 Stitching
2 Right side of
fabric
3 Basting
stitching
4 End of zipper
opening
.
1 Left side of the pin
2 Needle drop point
37
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

885-e34

Table of Contents