Technical Data - AEG ABE8122VNC User Manual

14 www.aeg.com
A
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter "E" or by the earth

9. TECHNICAL DATA

9.1 Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information is situated in
the rating plate, on the external or
10. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
B
C
D
E
mm
mm
mm
Hours
Volts
Hz
.
symbol or coloured green and
yellow.
2. Connect the wire coloured blue to
the terminal either marked with the
letter "N" or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
(E) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.
1225
556
550
22
230 - 240
50
internal side of the appliance and in the
energy label.
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the